Search :
Home About Us Products Machineries Projects Enquiry Contact Us
 

VALVES
» GM / Pressure Reducing Valves

Specification:

SPRING LOADED PISTON TYPE WITH RUBBER DISC SCREWED FEMALE ENDS.MAXIMUM WORKING TEMPERATURE 70°C.

Maximum Inlet Pressure        15 Bar
Outlet Pressure 0.5 - 4 Bar
Size 3/8" (10mm)-2" (50mm)

Piston Actuated
Light Weight
Compact
Self Operating
Simple to Set
Can be mounted in any position Widest spring adjustment

Water application Pressure Reducing valve will maintain a satisfactory reduced pressure under most operating conditions and it has a wide application in process work where regulation is required.

Operation

Fluid entering the valve through the inlet, establishes an equilibrium between the piston & the seat portion & then escapes through the outlet. The escaped fluid at the outlet enters the piston chamber.

When the reduced pressure attains force more than the spring force, it starts compressing the spring downward. It gives pressure reduction at the outlet by closing the disc from the higher inlet pressure.

An adjusting screw is turned clockwise to increase and anticlockwise to decrease the outlet pressure.>

Data Required While Ordering

Inlet Pressure, Outlet Pressure, Media, Temperature of the media, End Connection & other facts surrounding the installation which are pertinent thereto.

 
Krishna International - Email : dinthakkar@yahoo.co.in
Home | About Us | Products | Machineries | Turn Key Projects | Certificates | Enquiry | Search | Contact Us
Copyright © 2013 Krishna International